Indesit CP 0V9 M (X) DE S Instrucciones de uso descargar pdf (Pagina 16)

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or

coloured Red.

Connect the Blue wire to the terminal marked “N” or coloured

Black.

Replacing the cable

Use a rubber cable of the type H05RR-F with a suitable

cross section of 3 x 4 mm².

The yellow-green earth wire must be 2-3 cm longer than

the other wires.

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate.

The appliance must be directly connected to the mains

using an omnipolar circuit-breaker with a minimum contact

opening of 3 mm installed between the appliance and the

mains. The circuit-breaker must be suitable for the charge

indicated and must comply with current electrical regulations

(the earthing wire must not be interrupted by the circuit-

breaker). The supply cable must not come into contact with

surfaces with temperatures higher than 50°C.

! The installer must ensure that the correct electrical connection

has been made and that it is compliant with safety regulations.

Before connecting to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with

the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate.

• The voltage is in the range between the values indicated

on the data plate.

• The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Safety Chain

! In order to prevent the appliance from overturning

accidentally, for example in case of a child climbing

onto the oven door, the safety chains MUST be installed!

The cooker is provided with safety chains that must be

xed with a screw (not supplied as accessory) on the wall

behind the appliance, at the same height as the xing point

on the appliance.

Make sure that the chains are xed in the back of the

cooker, as shown in the drawing, in such way to be tight

and parallel to the oor.

! When the installation process is complete, the chains must

be kept in tension!

TABLE OF CHARACTERISTICS

Oven

dimensions

HxLxP

32,9 x 59,5 x 39,4 cm

Volume

lt. 78

Voltage and

frequency

230/400V~ 3N 50Hz (see data plate)

Power supply Max 10 kW

ENERGY

LABEL

Directive 2002/40/EC on the label of

electric ovens.

Standard EN 50304-60350

Energy consumption for Natural

convection – heating mode:

Convection mode

Declared energy consumption for

Forced convection Class –

heating mode: Fan assisted.

This appliance conforms to the following

European Economic Community

directives:

- 2006/95/EEC dated 12/12/06 (Low

Voltage) and subsequent amendments

- 2004/108/EEC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2012/19/EEC and subsequent

amendments.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comentarios a estos manuales

Sin comentarios

Indesit CP 0V9 M (X) DE S Instrucciones de uso Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Indesit CP 0V9 M (X) DE S