Indesit KN6G21S(W)/I S Instrucciones de uso Pagina 18
- Pagina / 48
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
18
GB
• Do not position
blinds behind the cooker or less than 600 mm away
from its sides.
• Any hoods must be installed according to the
instructions listed in the relevant operating manual.
Levelling
If it is necessary to level the
appliance, screw the adjustable
feet into the places provided on
each corner of the base of the
cooker (see gure).
The legs* fit into the slots on the
underside of the base of the
cooker.
Electrical connection
Install a standardised plug corresponding to the load
indicated on the appliance data plate (see Technical
data table).
The appliance must be directly connected to the mains
using an omnipolar circuit-breaker with a minimum contact
opening of 3 mm installed between the appliance and the
mains. The circuit-breaker must be suitable for the charge
indicated and must comply with NFC 15-100 regulations
(the earthing wire must not be interrupted by the circuit-
breaker). The supply cable must be positioned so that it
does not come into contact with temperatures higher than
50°C at any point.
Before connecting the appliance to the power supply,
make sure that:
• The appliance is earthed and the plug is compliant with
the law.
• The socket can withstand the maximum power of the
appliance, which is indicated by the data plate.
• The voltage is in the range between the values
indicated on the data plate.
• The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only.
! The manufacturer declines any liability should
these safety measures not be observed.
Gas connection
Connection to the gas network or to the gas cylinder
may be carried out using a flexible rubber or steel hose,
in accordance with current national legislation and after
making sure that the appliance is suited to the type of gas
with which it will be supplied (see the rating sticker on
the cover: if this is not the case see below). When using
liquid gas from a cylinder, install a pressure regulator
which complies with current national regulations. To
make connection easier, the gas supply may be turned
sideways*: reverse the position of the hose holder with
that of the cap and replace the gasket that is supplied
with the appliance.
! Check that the pressure of the gas supply is
consistent with the values indicated in the Table
of burner and nozzle specifications (see below).
This will ensure the safe operation and durability of
your appliance while maintaining efficient energy
consumption.
Gas connection using a flexible rubber hose
Make sure that the hose complies with current national
legislation. The internal diameter of the hose must
measure: 8 mm for liquid gas supply; 13 mm for
methane gas supply.
Once the connection has been performed, make sure
that the hose:
• Does not come into contact with any parts that reach
temperatures of over 50°C.
• Is not subject to any pulling or twisting forces and
that it is not kinked or bent.
• Does not come into contact with blades, sharp
corners or moving parts and that it is not
compressed.
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.
* Only available in certain models
- AVVERTENZE 2
- Warnings 2
- POSICIÓN 5 4
- POSICIÓN 4 4
- POSICIÓN 3 4
- POSICIÓN 2 4
- POSICIÓN 1 4
- Installazione 6
- Avvio e utilizzo 11
- Precauzioni e consigli 14
- Manutenzione e cura 15
- Assistenza 16
- Installation 17
- Min. mm 18
- Start-up and use 22
- Precautions and tips 25
- Care and maintenance 26
- Instalación 27
- , luego pulse 32
- Tabla de cocción en el horno 34
- Precauciones y consejos 35
- Mantenimiento y cuidados 36
- Instalação 37
- Início e utilização 41
- Precauções e conselhos 44
- Manutenção e cuidados 45
- 05/2012 - 195103752.00 48
- XEROX FABRIANO 48
Relacionado con productos y manuales para Placas Indesit KN6G21S(W)/I S
Placas Indesit PKLL 641 D2/IX/A Instrucciones de uso
(28 paginas)
(28 paginas)
Placas Indesit SCHI 633 T L Instrucciones de uso
(72 paginas)
(72 paginas)
Placas Indesit TIP 844 DO L Instrucciones de uso
(84 paginas)
(84 paginas)
Placas Indesit KIO 633 T Z Instrucciones de uso
(80 paginas)
(80 paginas)
Placas Indesit EHP 750 T (X)/HA Instrucciones de uso
(20 paginas)
(20 paginas)
Placas Indesit PC 604 X Instrucciones de uso
(36 paginas)
(36 paginas)
Placas Indesit SCHI 744 DO L Instrucciones de uso
(72 paginas)
(72 paginas)
Placas Indesit PC 604 X Instrucciones de uso
(6 paginas)
(6 paginas)
Placas Indesit PKQ644DGH(K) AUS Instrucciones de uso
(12 paginas)
(12 paginas)
Placas Indesit KP9F96S(X)/EX S Instrucciones de uso
(24 paginas)
(24 paginas)
Placas Indesit VIA 630 S C Instrucciones de uso
(8 paginas)
(8 paginas)
Placas Indesit KP9F21S(X)/EX S Instrucciones de uso
(20 paginas)
(20 paginas)
Placas Indesit IB 644 CRFH E Instrucciones de uso
(32 paginas)
(32 paginas)
Placas Indesit KN3N11SA(W)/BG Instrucciones de uso
(80 paginas)
(80 paginas)
Placas Indesit FRIO 632 CP B.S Instrucciones de uso
(84 paginas)
(84 paginas)
Placas Indesit KN3G11S(X)/NL S Instrucciones de uso
(40 paginas)
(40 paginas)
Placas Indesit PK 640 R L GH AG Instrucciones de uso
(42 paginas)
(42 paginas)
Samsung WF1762W5C/YLO manuals
Owner’s manuals and user’s guides for Washing machines Samsung WF1762W5C/YLO.
We providing 1 pdf manuals Samsung WF1762W5C/YLO for download free by document types: User Manual
Comentarios a estos manuales