Indesit TIP 642 DD L Instrucciones de uso descargar pdf (Pagina 30)

Start-up and use

 The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

 A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.

 If the - or + button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the button

for approximately one second.

Switching on the cooking zones

To begin using a cooking zone, set the desired

power level using the

- and +.

 Press and hold the

+ button for approximately 2

seconds: the cooking zone will immediately begin

operating at its maximum power level (16).

 Press and hold the

- button for approximately 2

seconds: the cooking zone will operate at power

level 2 (slow cooking function).

Medium function*

Press the

ed i um

ed i umed i um

button to switch on the cooking zone

at medium power level 8.

Booster function*

The booster function for some of the cooking zones

may be used to shorten heating-up times. It may be

activated by pressing the

oost erbbooostost erer

button. The indicator

light directly above the button will illuminate. This

function boosts the power to 2000 W or 3000 W,

depending on the size of the corresponding cooking

zone.

It stops automatically after 4 minutes. While the

booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate at

a reduced power level (e.g. if the booster for the rear

left-hand hotplate has been activated, the power level

of the front left-hand hotplate will be reduced). For

further information, please refer to the Technical

description of the models.

Switching off the cooking zones

To switch off a cooking zone:

 Press the

- button: the power of the cooking zone

will progressively decrease until it is switched off.

 Alternatively, the

- and + buttons may be

pressed simultaneously: this immediately returns

the power setting to 0 and the cooking zone

switches off.

Programming the cooking duration

 If the and buttons are pressed for an

extended period of time, the timer scrolls quickly

through the minute values in the corresponding

direction.

 All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the temperature.

3. Press the

programming button.

4. Set the cooking duration using the

and

buttons.

5. Confirm by pressing the

button.

The timer begins counting down immediately. A

buzzer sounds for approximately 1 minute and the

cooking zone switches off when the set programme

has finished.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the

display will show the data for the hotplate with the

least time remaining, and the light corresponding to

the position of the hotplate will be switched on. The

lights corresponding to the other hotplates

programmed will flash.

Only available in certain models.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Comentarios a estos manuales

Sin comentarios

Indesit TIP 642 DD L Instrucciones de uso Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para No Indesit TIP 642 DD L