
GB
15
Fig.1
Fig.2
Securing the appliance to the cabinetSecuring the appliance to the cabinet
Securing the appliance to the cabinetSecuring the appliance to the cabinet
Securing the appliance to the cabinet
There are three different groups of appliance as far
as installation is concerned:
1- Built-in hobs to be slotted in (Class 3 - see fi-1- Built-in hobs to be slotted in (Class 3 - see fi-
1- Built-in hobs to be slotted in (Class 3 - see fi-1- Built-in hobs to be slotted in (Class 3 - see fi-
1- Built-in hobs to be slotted in (Class 3 - see fi-
gure 2, detail H1)gure 2, detail H1)
gure 2, detail H1)gure 2, detail H1)
gure 2, detail H1). In this case it is necessary to
make a hole in the worktop whose measurements
match those of the hob. The measurement at the
side should be reduced by 2 cm so as to ensure that
1 cm of the perimeter of the hob overlaps with and
rests on top of the supporting surface. To slot in the
hob flush with the worktop, the cut-out on this
supporting surface must be lowered (see figure 5-6),
so that both the edge of the hob and the seal under
it can be positioned there. Before fitting the hob to
the worktop, position the seal provided
"G" "G"
"G" "G"
"G" along
the perimeter of the hob, as illustrated in figure 4.
Brackets for fixing hobs to the cabinet have been
provided, and these should be fitted as shown in
detail
S. S.
S. S.
S.
Fig.4
GG
GG
G
NB: An insulatingNB: An insulating
NB: An insulatingNB: An insulating
NB: An insulating
wooden panel should bewooden panel should be
wooden panel should bewooden panel should be
wooden panel should be
fitted beneath the hob,fitted beneath the hob,
fitted beneath the hob,fitted beneath the hob,
fitted beneath the hob,
positioned at a minimumpositioned at a minimum
positioned at a minimumpositioned at a minimum
positioned at a minimum
of 20 mm from the hobof 20 mm from the hob
of 20 mm from the hobof 20 mm from the hob
of 20 mm from the hob
underside. This woodenunderside. This wooden
underside. This woodenunderside. This wooden
underside. This wooden
panel must bepanel must be
panel must bepanel must be
panel must be
removable in order toremovable in order to
removable in order toremovable in order to
removable in order to
allow for anyallow for any
allow for anyallow for any
allow for any
maintenance operationsmaintenance operations
maintenance operationsmaintenance operations
maintenance operations
beneath the hob.beneath the hob.
beneath the hob.beneath the hob.
beneath the hob.
Fig.5
Fig.3
Mi
n.
700mm
BUILT-IN HOB
HEIGHT= STEEL THICKNESS
BUILT-IN HOB
STEEL TICKNESS <HEIGHT < 53 mm
SIT ON - ON HOB
HEIGHT > 53 mm
Comentarios a estos manuales