Indesit B 40 L/CS SF Instrucciones de uso descargar pdf (Pagina 15)

Cleaning and maintenance

To ensure long life of the appliance, it is essential to carry out

a thorough general clean frequently, taking into account that:

• The appliance should be disconnected from the mains

supply before starting cleaning operations.

• Avoid cleaning appliance parts when they are still warm.

• The enamelled or chromed or glass parts must be washed

with warm water without using abrasive powders or

corrosive substances which could ruin them.

• The steel parts, especially in areas with the screen-printed

symbols, should not be cleaned with diluents or abrasive

detergents; preferably use just a soft cloth moistened with

warm water and liquid detergent for washing dishes (wipe

the cloth over the steel in the same direction as the satin-

finish).

Denatured alcohol may be used to remove stubborn dirt.

Stainless steel can be stained if it remains in contact with

agressive detergents (containing phosphorus) or water with

a high lime content. After washing the stainless steel parts

they should be rinsed and dried with a soft cloth

(washleather).

• After cleaning, some special treatments are available to

bring back the shine to steel and to prevent it from

yellowing; for this purpose, we recommend you use the

specific “special cream detergent for steel care” available

from our Assistance Centres.

• Avoid leaving acid liquids (vinegar, lemon juice, aggressive

detergents, etc.) on enamelled or painted parts.

• The removable parts of the burners should be washed

frequently with warm water and soap, making sure to remove

caked-on substance. Check that the gas outlet slits are not

clogged. Dry the burners carefully before using them again.

• Frequently clean the end part of the automatic glow plugs

of the hob.

• do not use steam cleaners to clean your oven.

Greasing the taps

As time passes, a tap may lock or become difficult to turn. In

this case it will be necessary to clean inside and replace the

grease.

This procedure must be performed by a technician authorized

by the manufacturer.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Sin comentarios

Indesit B 40 L/CS SF Instrucciones de uso Pagina 15